TBS Lucid Wing AIO 2-6S 50A For TBS Chupito – MyFPV

Description

Lucid Wing AIO 2-6S 50A For TBS Chupito

This AIO is intended for TBS Chupito.

Please Check Out Our Other TBS Products!

The TBS Lucid Wing AIO is your quick, plug-and-play solution for building high-performance FPV flying wings. This all-in-one board integrates a flagship-level STM32H7 flight controller with a powerful 50A AM32 ESC, all housed in a sleek, heat-dissipating case. With dedicated plug-in connectors for all your peripherals, the Lucid Wing AIO takes the chore out of building and gets you in the air faster and easier than ever before.

The Ultimate Plug & Play Wing FC Designed for both seasoned pros and enthusiastic newcomers, the Lucid AIO simplifies the entire build process. The board is enclosed in a protective case with clearly labeled JST connectors for your servos, VTX, camera, GPS, and even an external USB port. This plug-and-play design minimizes soldering and ensures a clean, reliable, and easy-to-maintain setup for wings with up to a 1m wingspan.

Flagship-Level Performance This AIO is packed with the most powerful hardware available. It’s driven by a blazing-fast STM32H743 MCU running at 480MHz and features a dual ICM42688 gyro setup for exceptionally clean and accurate flight data. The integrated 50A ESC runs on modern 32-bit AM32 firmware, delivering smooth, efficient, and powerful performance on up to 6S LiPo. It’s the perfect core for a high-speed or long-range FPV wing.

Key Features:

• All-in-One Wing Solution: Integrates an H7 FC and a 50A 6S ESC into a single, easy-to-use board.
• Plug & Play Connectors: Dedicated JST ports for servos, VTX, camera, GPS, and more for a solder-free build.
• Powerful H743 Processor: A top-of-the-line MCU provides the processing power for advanced features in ArduPilot and INAV.
• Dual Gyro System: Two ICM42688 gyros provide redundant, high-quality data for ultimate stability.
• 50A AM32 ESC: A powerful 32-bit ESC provides smooth, reliable power for demanding setups.
• Powerful Servo BEC: A dedicated, switchable 5A BEC provides robust power for your servos and video system.

Firmware & Setup Notes:

• Firmware Targets: ArduPilot: TBS_LUCID_H7_Wing / INAV: TBS_LUCID_H7_WING_MINI
• INAV Users: To ensure proper operation, you must apply the recommended CLI settings provided by TBS to correctly map the motor and servo outputs.
• DJI OSD: Fully compatible via a spare UART port. A plug-and-play DJI O3 cable is included.

Specifications (Highlights)

• MCU: STM32H743 @ 480MHz
• Gyro: Dual ICM42688
• Blackbox: MicroSD card slot
• Input Voltage: 6V−26V (2 to 6S LiPo)
• ESC Continuous Current: 50A
• ESC Firmware: AM32
• Servo BEC: 5V/6V/7.2V @ 5A (Switchable)
• 5V BEC: 1A for FC and peripherals
• UARTs: 5 External, 2 Internal

Includes

• 1x TBS Lucid AIO Wing FC
• 1x FC-to-USB Board & Cable
• 1x FC-to-VTX Cable
• 1x DroneCAN Cable
• 1x DJI O3 Cable (Plug & Play)
• 1x Full set of peripheral connector cables

Downloads

• AM32 Online Configurator
• AM32 Firmware
• TBS Lucid Manual