Description
The SkyStars Fly Stack features an H743 Dual Gyro HD Flight Controller and a KM 60A BLHeli_32 4-in-1 ESC with a 30×30 mounting pattern.
Check out our other 30×30 Stacks, and our SkystarsRC collection!
SkyStars H743 HD Flight Controller
- Input Voltage: 3-6S LiPo
- MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
- Gyro: BMI270 Dual
- Baro: BMP280
- OSD: Betaflight OSD
- UARTs: 8 Sets
- 8x PWM outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
- USB Type-C(USB2.0)
- 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
- 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
- Dual Camera Inputs switch
- VTX 10V/Vbat filtered power ON/OFF switch
- DJI FPV OSD is supported by any spare UART
- Vbat Input: 7~25V (2~6S LiPo)
- BEC: 5V 2A Continuous (Max 3A)
- LDO 3.3V: Max 250mA
- Firmware: Betaflight – SKYSTARSH7HD
- Ardupilot : SKYSTARSH7HD
- Mounting: 30.5 x 30.5mm
- Dimensions: 39.5 x 39.5 x 7.8 mm
- Weight: 10.1g
SkyStars KM60 60A BLHeli_32 4-in-1 ESC – 30×30
- Continuous Current: 60A x4
- Burst Current: 80A x4
- Supports 3-6S battery
- Supports Dshot1200, Dshot600, Dshot300, PWM control signal
- ESC telemetry Supported
- No output BEC
- BLHeli_32 firmware
- Dimensions: 41×46
- Weight: 18g
- Mounting holes: 30.5×30.5 M3
Includes
- 1x SkyStarsRC 30×30 Fly Stack H7 Single Gyro FC / KM60 BLHeli-32 45A 3-6S
Reviews
There are no reviews yet.