Mayatech MT08MAII Metal Gear Servo – Steering Gear Fixed Wing Helicopter Trolley / Ship Model 180 Degrees Digital Servo

Description

Mayatech MT08MAII Metal Gear Servo SPECIFICATIONS

Brand Name: Mayatech

Origin: Mainland China

Material: Composite Material

Recommend Age: 12+y

RC Parts & Accs: Servos

Size: 23mm*12mm*32mm

For Vehicle Type: Airplanes

Use: Vehicles & Remote Control Toys

Remote Control Peripherals/Devices: Servos

Tool Supplies: Assembly Category

Quantity: 1 pcs

Model Number: MT08MAII

Mayatech MT08MAII Metal gear steering gear fixed wing helicopter trolley / ship model

Product introduction

It can be widely used for model aircraft with 9g hole size. such as micro aircraft. hand throwing glider. flying wing. 3D. indoor model. KT aircraft. f3p. EPP aircraft. etc

Note：

 1. Please pay attention to adjust the center before installing the steering gear arm to avoid damage

 2. 180 degrees can only be achieved by using the control board of the robot. and the general remote controller can only reach about 90 degrees

 3. 360 degree refitted steering gear: it is actually equivalent to a deceleration steering gear with stepless speed change. which can control speed and direction. There is no function of 0-360 degree angle control. The control mode is the same as the control signal of general steering gear. It is a suitable power source for tile modification

4. When the high level is 1 ms ~ 1.5 ms. the steering gear rotates forward (the forward rotation speed is the fastest in 1 ms. the closer it is to 1.5 ms. the slower it is. and the steering gear stops at 1.5 ms). When the high level is 1.5 ms ~ 2 ms. the steering gear reverses (the steering gear stops at 1.5 ms. the faster the reverse speed is when it is closer to 2 ms. and the reverse speed is the fastest in 2 ms).

Product parameters

 Product model：MT08MAII

 Product size: 23mm * 12mm * 32mm

 Product weight: 13.6g

 Working torque: 2.4kg/cm (4.8V) 2.8kg/cm (6V)

 Reaction speed: 0.11 “/ 60 ° (4.8V) 0.09” / 60 ° (6.0V)

 Service temperature: 0 ℃ – 55 ℃

 Dead band setting: 5 microseconds

 Plug type: Jr. Futaba universal

 Rotation angle: 180 °

 Steering gear type: digital steering gear

 Service voltage: 4.8v-6v

 Structural material: metal copper teeth. hollow cup motor. double ball bearing

 List of accessories: rudder plate. wire length of 25cm. fixing screw. damping sleeve and aluminum      kit. etc

This price is a single price. packing list:

Steering gear * 1 + rudder arm * 3 + screw * 3