Happymodel Mobula8 2S 85mm DJI O3 HD Micro FPV Whoop Drone
Sale!

Happymodel Mobula8 2S 85mm DJI O3 HD Micro FPV Whoop Drone

Original price was: $95.00.Current price is: $28.50.

DJI O3 Air Unit:

SKU: 6900893122629 Category:

Description

The Happymodel Mobula8 2S 85mm DJI O3 HD Micro FPV Whoop Drone provides a digital HD experience with high-performance power to rip through the air. Enjoy the ultimate in FPV whoop drone performance with a reliable air unit and an incredibly fast power system.

Features:

  • Digital HD FPV experience
  • New CrazyF405 ELRS HD flight controller
  • Powerful and Smooth
  • UART ExpressLRS 2.4GHz receiver
  • Built-in blackbox for Gyroflow and PID Tune

Specifications:

  • Frame:  Happymodel Mobula8
  • Flight Controller:  CrazyF405HD UART ELRS AIO
  • Motor:  EX1103 KV11000 Brushless
  • Propellers:  Gemfan Hurricane 2023 tri-blade
  • VTX:  DJI O3 Air Unit
  • Camera:  DJI O3 Camera

MOTOR

  • Mode: EX1103 KV11000
  • Configu-ration:9N12P
  • Stator Diamter:11mm
  • Stator Length:3mm
  • Shaft Diameter:Φ1.5mm
  • Motor Dimension(Dia.*Len):Φ13.5mm*15.5mm
  • Weight(g):3.8g
  • No.of Cells(Lipo):1-2S

FLIGHT CONTROLLER

  • MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH)
  • GYRO Sensor: BMI270 (SPI connection)
  • Mount hole size: 25.5mm*25.5mm
  • Power supply: 1-2S battery input (DC 2.9V-8.7V)
  • Built-in 12A(each) Blheli_S 4in1 ESC
  • Built-in Serial ExpressLRS 2.4G
  • Built-in BMP280 Barometer
  • Built-in 8MBp blackbox
  • Built-in voltage meter sensor, voltage meter scale 110
  • Built-in current meter sensor, current meter scale 470

ONBOARD 4-IN-1 ESC

  • Power supply: 1-2S LiPo/LiPo HV
  • Current: 12A continuous peak 15A (3 seconds)
  • Support BLHeli_S Bluejay firmware
  • Factory firmware: Bluejay ESC V0.19
  • Firmware target: Z-H-30
  • Default protocol: DSHOT300
  • When use 1s battery and high KV 0702/0802 motors, should set startup power to 1100/1200

ONBOARD UART ELRS 2.4GHZ RECEIVER

  • Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
  • RF Frequency: 2.4GHz
  • Antenna: enameled copper wire 31mm length
  • Telemetry output Power: <12dBm
  • Default firmware version: ExpressLRS V3.0.1
  • Firmware target: HappyModel EP 2400 RX
  • Could update firmware via ExpressLRS configurator

DJI O3 AIR UNIT

  • Works with DJI FPV Goggles V2, DJI Goggles 2, and DJI FPV Remote Controller 2
  • D-Cinelike mode for Vivid Colors
  • Flagship O3+ Video Streaming
  • Customizable Canvas Mode
  • 155° Super-Wide FOV
  • 1/1.7-Inch Sensor
  • Compact in Size

Includes:
1x Happymodel Mobula8 2S 85mm DJI O3 HD Micro FPV Whoop Drone

Additional information

mycustom

DJI O3 Air Unit#Not Included>Included

Reviews

There are no reviews yet.

Be the first to review “Happymodel Mobula8 2S 85mm DJI O3 HD Micro FPV Whoop Drone”

Your email address will not be published. Required fields are marked *