COB LED / Race Wire Combo Pack – For HeavyMetal Frame – (Choose Color)

Description

Everything you need to LIGHT up your HeavyMetal Frame!!! Be sure to stand out in a crowd with 800mm of super bright COB LEDs… Combine with Oversized Race Wire PCB for a super clean build, quick motor changes & easy LED mounting… Sized for our standard HeavyMetal arms / Compatible with most 7″ Street League & Pro Stock Frames…

Note: Not Compatible With HeavyMetal – PRO Short Arms… (See COB LED / PRO Race Combo Pack)…

COB LED Specs: 12v COB LED strips can be powered by soldering the positive and negative LED pads to any 2 ESC motor channels (3S – 5S quads)…

Note: 24v COB LEDs Recommend For 6S (Not Included)

Note: COB LED strips come soldered from the manufacturer at intervals, it is normal to receive random LED strips with solder pre-applied to 2 of the pads… 

Oversize Race Wire Specs: Dimensions: 67mm Long × 15mm wide × 2mm thick | Double layered extra wide 3oz. copper traces | Extra large EZ solder pad for motor wires & COB LEDs

Weight: Kit adds approximately 30 grams total weight once assembled…

Build Tips: – Expose adhesive backing on 50mm LED strips (8x), apply to race wire PCB and solder the 4 corners to make LED Race Wire… (Note: When attaching double LED strips to a single PCB the negative sides of both strips must share the center solder pad or only 1 strip will light up)… Attach LED Race Wire to top of arms with double sided tape (not included)… Apply 75mm LED strips (4x) to bottom of arms, connect to 2 ESC channels using 2 short wires… (100mm strip included as extra for repairs)… 

Included:

– Oversized Race Wire PCB w/ solder pads for COB LEDs – (4x)
– 50mm Length COB LED strips – (8x)
– 75mm Length COB LED strips – (4x)
– 100mm Length COB LED strip – (1x)