Description

The next generation of FETtec’s popular KISS AIO flight controller has arrived! This board with 20×20 mm mounting holes features the latest STM32 G4 MCU with math accelerator for the ultimate in flight performance, onboard OSD for KISS flight tuning, 2 dedicated BECs for 5V and 16V switchable power, DSHOT2400 outputs, and ESC with full sine wave control.

A truly versatile product with KISS performance, small size to fit in tight places, and all the features you’d expect from bigger boards.

Specifications:

FLIGHT CONTROLLER

Latest STM32G4 Processor

170Mhz + Math accelerator
MPU6000

Supply voltage 12-25V (3S-6S Lipo voltage)
2x dedicated onboard 5V BEC for VTX (max. 600mA each)

5V BEC for RX
5V/16V BEC for VTX (switchable and real Pit*)

1x 8 pin connector for solder-free VTX, cam connection and OSD or digital systems

VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

2x 4 pin connector for receiver and VTX

Signal, telemetry, 5V, gnd
Gnd, 5V, TX1, RX1

5 UART serials

UART 1 free
UART 2 used for Receiver
UART 3 free
UART 4 used for onboard OSD, can be set free
UART 5 used for ESCs / TLM / Onewire

Solder pad for RGB LEDs
Supported ESC protocols

PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

KISS FC firmware

* Real Pit-Mode: A power supply pin which is remotely switchable

4-In-1 ESC

Active current limiting @ 35A
Input voltage: 3s-6s
High-quality 40V MOSFETs
STM32G071 @ 64MHz
Up to 128 kHz Motor PWM
Full sine wave control
Automatic input signal detection

PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

FETtec ESC firmware

OSD

Onboard OSD

Graphic OSD (STM32)
Full KISS Tuning
Filter (PIDs, Rates, Settings)
LED control (RGB LED, Racewire)
VTX
Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
KISS GPS support + live map
Custom graphic pilot logo
Stick overlay
Custom layout
can be deactivated for usage of digital systems

Connector type: JST-SH-1mm

DIMENSIONS

Maximum outside dimensions: 30 x 37.5mm

Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)

Overall Height: 7.9mm
Weight: 8.9g

Includes:
1x FETtec KISS AIO Flight Controller and 35A 4-In-1 ESC
1x Capacitor 50V 470µF
2x 4 pin cable with JST connector
1x 8 pin cable with JST connector
Standoffs