FuriousFPV – RACEPIT MINI OSD Blackbox Flight Controller – MyFPV

Description

FuriousFPV – RACEPIT MINI OSD Blackbox Flight Controller

The FuriousFPV RacePIT MINI flight controller is the 20x20mm version of the popular Racepit FC, packing an incredible number of features into a compact form factor. With a built-in VTX power switch, an onboard dual-camera switcher, and a full 6 hardware UARTs, it’s the ultimate feature-packed brain for any high-performance, compact FPV drone build.

Unprecedented Features in a Mini FC

• Remote VTX Power Switch: Say goodbye to overheating video transmitters. The Racepit MINI has a built-in VTX power switch that lets you turn your VTX on and off with a switch on your radio. Power up safely, wait for GPS lock, and then turn on your VTX right before you take off, all without disturbing other pilots’ video.
• Onboard Camera Switching: Perfect for “cheater quads” or cinematic rigs, the built-in camera switcher allows you to connect two FPV cameras and switch between them in flight using your radio. Set up a low-angle camera for landing and a high-angle one for racing, all controlled from a single board.

Powerful & Connected

Built around a reliable STM32F405 MCU and the clean MPU6000 gyro, the Racepit MINI delivers a smooth, locked-in flight feel. With an incredible 6 full hardware UARTs, you have more than enough ports to connect all your peripherals—receiver, GPS, VTX control, and more—without compromise. The 16MB onboard blackbox is ready for all your tuning needs.

Key Features:

• VTX Power Switch: Remotely turn your VTX on and off to prevent overheating and interference on the bench.
• Onboard Camera Switcher: Connect and switch between two FPV cameras in-flight for ultimate versatility.
• Full 6 UARTs: Massive connectivity for a 20x20mm board, allowing for complex builds with GPS, a dedicated receiver, and more.
• Powerful F405 + MPU6000: A reliable and smooth-flying combination trusted by pilots.
• 16MB Onboard Blackbox: Provides plenty of high-speed data logging for tuning without needing an SD card.
• Builder-Friendly: Includes a 4-in-1 ESC connector (and pads) and an inverter for FrSky S.BUS/S.PORT.

Specifications

• CPU: STM32F405
• Gyro: MPU6000
• Input Voltage: 2-6S LiPo
• BEC: 5V@2A
• Black Box: 16MB Onboard Flash
• UARTs: 6
• Mounting: 20x20mm
• Special Features: VTX Power Switch, Dual Camera Switcher

What’s in the Box?

• 1x Furious FPV RACEPIT MINI F4 Flight Controller
• 1x 4-in-1 ESC Connection Cable
• 1x Set of Mounting Grommets